Submitted by unfretted on Fri, 03/19/2010 - 04:58.
Good question Synthany. We been wondering that too. With a bit of luck it could be tried out now the 28th March at Rogers place. The plan so far is to Livestream us 4 with one cam.
OK - LiveStream looks good. Also Vimeo. How do we get multiple streams going in one frame?
You know so that there is one image of each person sending video in the jam.
I guess we could use mebeam for live multiple video streams, but just putting up recordings works too.
live is best though if possible.
andy: i found your thread in the ninjam forum from last May. thanks. could you give an update please?
Last May, I have troubel with last week :)
But you would want this, for a mebeam like effect but better results.
Here is a NINBOT Party we had, the one after the one you was at I think, it was announced but you must have been away.
Anyway this shows us all, was a simple screen grab which procaster (livestream app) can do plus you could mix in another webcam of say you lot there. http://www.livestream.com/ninjam/video?clipId=pla_edad609b-c970-4fe4-a7a...
Normally there is a tiny link available but hmm can't find where they was.
Don't think I can embed flash in a page on NINBOT, but would be neat if that was enabled on Tom.
To achieve hat just goto http://zorap.com you don't have to sign up but doing so would be better.
The one we used for NINBOT Parties is http://www.zorap.com/NINJAM
On Ninjamers you can access it and it shows a little pre entry window showing who is in but I tried and tried but could not rip it on a perniment basis, it uses self generated links which adjust each time.
There will be probs a set source but its shrouded and I got busy on something else at the time.
But if you want to be very advanced you could grab hold of Elektronika 2.73 which is free now at http://aestesis.eu and you could use WebCamXP's free IP cam source driver (picks up like a webcam) then u could pull that into Elektronika, create multiple instances of it then get others on IP cams and edit them realtime with glorious video fx's controlled by midi controller or data. IP Cams can be made using WebCamXP, which is also free but has a logo in it.
Better capture rate might be achieved with Procaster, it allows for almost all settings that FME does but it also pop's up the chat window that isn't captured when it captures the screen.
Plus you won't see FME and desktop when you start streaming, as well you will be able to set options like send to on demand folder automatically etc and start live.
This can be achieved in FME with arguments in the command line used but its nicer and has screen capture built into it, saving the need for source drivers sending to and from apps.
![DSCN4000[1].JPG](http://ninbot.com/files/imagecache/basic/pictures/photos/DSCN4000%5B1%5D.JPG "DSCN4000[1].JPG")
Good question Synthany. We
Good question Synthany. We been wondering that too. With a bit of luck it could be tried out now the 28th March at Rogers place. The plan so far is to Livestream us 4 with one cam.
Perfect timing for any tips
OK - LiveStream looks good.
OK - LiveStream looks good. Also Vimeo. How do we get multiple streams going in one frame?
You know so that there is one image of each person sending video in the jam.
I guess we could use mebeam for live multiple video streams, but just putting up recordings works too.
live is best though if possible.
andy: i found your thread in the ninjam forum from last May. thanks. could you give an update please?
Last May, I have troubel
Last May, I have troubel with last week :)
But you would want this, for a mebeam like effect but better results.
Here is a NINBOT Party we had, the one after the one you was at I think, it was announced but you must have been away.
Anyway this shows us all, was a simple screen grab which procaster (livestream app) can do plus you could mix in another webcam of say you lot there.
http://www.livestream.com/ninjam/video?clipId=pla_edad609b-c970-4fe4-a7a...
Normally there is a tiny link available but hmm can't find where they was.
Don't think I can embed flash in a page on NINBOT, but would be neat if that was enabled on Tom.
To achieve hat just goto http://zorap.com you don't have to sign up but doing so would be better.
The one we used for NINBOT Parties is http://www.zorap.com/NINJAM
On Ninjamers you can access it and it shows a little pre entry window showing who is in but I tried and tried but could not rip it on a perniment basis, it uses self generated links which adjust each time.
There will be probs a set source but its shrouded and I got busy on something else at the time.
But if you want to be very advanced you could grab hold of Elektronika 2.73 which is free now at http://aestesis.eu and you could use WebCamXP's free IP cam source driver (picks up like a webcam) then u could pull that into Elektronika, create multiple instances of it then get others on IP cams and edit them realtime with glorious video fx's controlled by midi controller or data. IP Cams can be made using WebCamXP, which is also free but has a logo in it.
Or ya could just use Zorap. :)
Synth, We tried yesterday
Synth,
We tried yesterday Ninjam+zorap+Livestream and it was ok. Some minor
problems but it works.
http://www.livestream.com/digitsignallive/video?clipId=pla_c97a93c2-72cd...
sorry, dubblepost
sorry, dubblepost
Better capture rate might be
Better capture rate might be achieved with Procaster, it allows for almost all settings that FME does but it also pop's up the chat window that isn't captured when it captures the screen.
Plus you won't see FME and desktop when you start streaming, as well you will be able to set options like send to on demand folder automatically etc and start live.
This can be achieved in FME with arguments in the command line used but its nicer and has screen capture built into it, saving the need for source drivers sending to and from apps.
Thanks Andy, I sent it on to
Thanks Andy, I sent it on to Jim...