I need help configuring my Digi 002 on a G5 running OSX 10.5.8
Submitted by GreenFog Studios on Thu, 04/26/2012 - 07:09.
I can get on, transmit and receive but only channel 1 works on both input and output. I would like to get stereo out and I would like to transmit on 2 or more channels. When I select the second channel and set the input to anything other than 1 I don't get signal and I only get the left side for playback. Has anyone found out why this happens with a digi 002 rack? or if there are any work arounds? fortunatly I have multiple G5 digi002 rigs so I can use both to transmit two channels but I'm still getting a mono mix from stereo users.
What's your software set up?
What's your software set up? How are your hardware ins/outs configured now?
Not everything can be fixed
Not everything can be fixed in pro tools. I'm running a G5 dual 2 GHZ with Gigs of ram, Digi 002 rack and using the Digi core audio. Ninjam config is HW 002 in and out. In the ninjam channel select I get 1 - 8 but only 1 works and I only get audio out of channel 1. there is no way to config the output channels. I wish I could assign specific outputs to received channels but I don't think that's an option. If I use the built in audio and not the digi 002 then I do get stereo but I have to use an optical input and external converter. I have played back stereo with that but not tried to transmit that way yet.
I'm running OSX 10.5.8. My
I'm running OSX 10.5.8. My pro tools version is 8.03 and ninjam Version 0.02a. I am not running pro tools recording softare when I get on ninjam just the digi core audio.
You might try the OSX
You might try the OSX version of Reaper.